Select Page

Accessories

A stroke indicator is a product that can be screwed to a safety device in order to see from a distance whether the safety has been deployed. There are models that only have a visual indication, but there are also models where a contact can be added to view the state of safety from longer distances.

Slam shutt valve Elster-Jeavons S-100 and Elster-AMCO OPSO 1800 industrial regulator

888-888-544-278: Stroke indicator for slam shutt valve S100 LP / HP

888-888-544-281: Stroke indicator for slam shutt valve S100 LP / HP with read contact

888-888-544-276: Stroke indicator for slam shutt valve S100 LP / HP with proximity switch

 

Slam shutt valve Elster S-200

888-888-544-275: Stroke indicator for slam shutt valve S200 LP / HP

888-888-544-279: Stroke indicator for slam shutt valve S200 LP / HP with read contact

888-888-544-288: Stroke indicator for slam shutt valve S200 LP / HP with proximity switch

OPSO-Pneumax

888-888-544-282: Stroke indicator for OPSO-Pneumax LP / HP

888-888-544-280: Stroke indicator for OPSO-Pneumax LP / HP with read contact

888-888-544-289: Stroke indicator for OPSO-Pneumax LP / HP with proximity switch

Special tool for adjusting the safety shut-off unit type USSA.

888-888-514-337: Setting key for USSA safety shut-off.

Special tool for adjusting the outlet pressure of the 1800B2 gas pressure regulator.

888-888-514-336: Setting key for setting the main spring of the gas pressure regulator 1800-B2

Special tool for adjusting the cut-off value and for resetting the S-100.

This is a reset key for the safety shut-off unit S-100 “OLD” model reset axis. Brass hexagon cap nut.

888-888-544-136: RESET / ADJUST TOOL SSV HEX. 9/16’’.

Special tool for resetting the safety shut-off devices S-100 and S-200.

This is a reset key for the safety shut-off devices S-100/200 new model reset axis. Squares axis tap.

888-888-544-200: Resetting key GY 10mm.

Special tool for resetting the safety shut-off devices IPS L / H – SR L / H.

200-100-000-730: Resetting key IPS-L, IPS-H, SR-L and SR-H.

Special tool for resetting the IP-LR and IP-HR safety shut-off.

200-100-000-731: Resetting key IP-LR and IP-HR.

Signalling can be installed on the IP LR/HR, IPS L/H and SR L/H safety shut-off devices. It is a proximity switch and a corresponding bracket for mounting the switch. If you want to mount a switch, we need the following information. This switch can only be mounted on a safety shut-off unit with a new model reset shaft, with indication red/green.

  • Type of safety shut-off.
  • Diameter of the safety shut-off.
  • Flow direction with respect to the reset shaft.
When an Axial Flow Valve (AFV) has to be removed from a pipe, there may be pressure on the pipe. That means that there is so much pressure on the AFV that you will not get him out of the piping. In order to be able to disassemble the AFV, Flange Separators can be used. You place this tool between the threaded rods of the AFV. By turning the tool out, the flanges separate and you can remove the regulator between them.

888-888-516-104: Flange separator for AFV diameter 2″, 3″ and 4″.

888-888-516-105: Flange separator for AFV diameter 6″ and 8″.

888-888-516-126: Flange separator for AFV diameter 12″.