Select Page

Gas pressure regulators medium pressure

Gas pressure regulators with an inlet pressure up to 10.0 barg

Gas pressure regulator type 121

The Sensus type 121 gas pressure regulator is a spring-loaded regulator. The regulator is normally open. The controller has a single diaphragm with a balanced valve. Depending on the operating conditions, a diaphragm box with a diameter of 8 “, 12” or 16 “diameter can be chosen. The regulator is available in connection sizes ranging from 3/4 ” up to 4″.

Gas pressure regulator type 143-80

The Sensus type 143-80 gas pressure regulator is a spring-loaded regulator. The regulator is normally closed. The regulator is ideal for (industrial) applications with smaller capacities. This regulator is available with a safety Relief (type 2) and without a safety Relief (type 1). The DN25 PN16 version is also available with a safety shut-off The regulators is available in the 3/4 ″ connection sizes and 1″ NPT and DN25 PN16.

Gas pressure regulator type 243

The Sensus type 243 gas pressure regulator is a regulator for larger capacities. It is a spring-loaded regulator that is extremely suitable for distribution, delivery and industrial applications due to its construction. The regulator is available with and without a safety Relief and with or without a safety shut-off. The regulator is available in the connection sizes 1.1 / 2 “NPT, 2” NPT and DN50 PN16. The maximum inlet pressure is 8.6 barg for the screwed connection and 10.0 barg for the flanged connection. The outlet pressure has a spring range between 5 mbarg and 4.22 barg. Capacities up to 600 std.m3 / h (natural gas).

Pilot regulator type IC-25

The IC-25 pilot is not a stand-alone regulator. It is a pilot pressure regulator for the Elster Axial Flow Valve. The IC-25 is suitable for inlet pressures up to 10.0 barg. Thanks to its universal connection block (manifold), it fits on every type of Axial Flow Valve.

Gas pressure regulator type 1800B2

The Elster gas pressure regulator type 1800B2 is a very commonly used gas pressure regulator for domestic and small industrial applications. Various designs are possible, namely with and without safety Relief. Safety shut-off against under pressure, overpressure and combined. The regulator is available in the 3/4 ″ connection sizes and 1″ NPT and DN25 PN16.

Gas pressure regulator type 1800CP-B2

The Elster gas pressure regulator type 1800 CP-B2 is a pilot regulator for small industrial applications. The gas pressure regulator is available with and without safety shut-off. The most common connection size is 1 “BSP-Tr. Maximum inlet pressure = 8.6 barg. The outlet pressure has a spring range between 70 mbarg and 2.0 barg. The maximum capacity of the controller is 250 m3/h. The controller is also available with a safety shut-off.

Gas pressure regulator type 3000

The Elster gas pressure regulator type 3000 is particularly suitable for small distribution networks and industrial applications. Due to its unique construction this type of regulator is ideal for gas fired ovens and boilers. The regulator is available in connection sizes 1.1/4 “, 1.1/2”, 2 “NPT / BSP and DN50 PN16, DN80 PN16, DN100 PN16 and 2”ANSI125lbs. Maximum inlet pressure 2.0 barg. The outlet pressure has a spring range between 2.5 and 140 mbarg.

Gas pressure regulator type J125

The Elster gas pressure regulator type J125 is a gas pressure regulator that is deployable over a wide range when precise control is required. These regulators are suitable for inlet pressures of 70 mbarg up to 8.6 barg. The regulator is suitable for outlet pressures up to 140 mbarg. The controller is suitable for domestic and small industrial applications as well as for burner installations. The controller is available with a built-in full safety Relief or limited safety Relief The regulator can be fitted with a safety device against under pressure, overpressure or a combination. The controller is available in the connection sizes 3/4 “, 1” BSP.

Gas pressure regulator type J125

The Elster gas pressure regulator type J125 is a gas pressure regulator that is deployable over a wide range when precise control is required. These regulators are suitable for inlet pressures of 70 mbarg up to 8.6 barg. The regulator is suitable for outlet pressures up to 140 mbarg. The regulator is suitable for domestic and small industrial applications as well as for burner installations. The regulator is available with a built-in full safety Relief and with a limited safety Relief. The regulator can be fitted with a safety device against under pressure, overpressure or a combination. The controller is available in the connection sizes 1.1 / 2 “and 2” screwed and DN50 PN16 flanged.

Gas pressure regulator type J123

The Elster gas pressure regulator type J123 is mainly used for industrial applications where large capacity is required. The regulator is available in the connection sizes DN50, DN80 and DN100. The maximum inlet pressure is 4.0 barg and the maximum outlet pressure is 350 mbarg

Gas pressure regulator type J123-HP

The Elster gas pressure regulator type J123 is mainly used for industrial applications where large capacity is required. The controller is available in the connection sizes DN50 PN16, DN80 PN16. The maximum inlet pressure is 4.0 barg and the maximum outlet pressure is 1035 mbarg.

Gas pressure regulator type M2R

The Elster gas pressure regulator type M2R is available in many different versions due to its modular construction. It is suitable for an inlet pressure of 50 mbarg – 5.0 barg. The spring range of the outlet pressure ranges from 18 – 400 mbarg. Connection size 1 “/ DN25 in various types of connections.

Gas pressure regulator type MR 5/6

The Elster gas pressure regulator type MR 5/6 is a spring-loaded regulator. The regulator is normally closed. The regulator is ideal for regulating various gases for small industrial and domestic applications. This type of regulator is available with and without a safety Relief. Inlet pressure per type is a maximum of 1, 5 or 6 barg. The spring range of the outlet pressure ranges from 20 – 300 mbarg. Connectors DN25 screwed, DN25 PN16 and DN50 PN16 flanged.

Gas pressure regulator type MR PN10

The Elster gas pressure regulator type MR PN10 is a spring-loaded regulator. This regulator is suitable for controlling various gases for small industrial and delivery installations. This type of regulator is available with and without a safety Relief. The inlet pressure is a maximum of 10.0 barg. The spring range of the outlet pressure ranges from 20 to 500 mbarg. Connectors DN25 PN16 and DN50 PN16 flanged.