Select Page

Gas pressure regulators with low inletpressure

Gas pressure regulators with a maximum inletpressure of 1,0 barg

Gas pressure regulator type 121

The Sensus type 121 gas pressure regulator is a spring-loaded regulator. The regulator is normally open. The controller has a single diaphragm with a balanced valve. Depending on the operating conditions, a membrane box with a diameter of 8 “, 12″ or 16 ” can be chosen. Connection sizes range from 3/4 “to 4”.

Gas pressure regulator type 122

The Sensus type 122 gas pressure regulator is a spring-loaded regulator. The regulator is normally open. The controller has a double diaphragm for obtaining a very precise pressure control in case of a rapid successive change in capacity.

Gas pressure regulator type MR PN1

The Elster type MR gas pressure regulator is a spring-loaded regulator. The regulator is normally closed. The controller is ideal for controlling various gases for small industrial and domestic applications. This type is available as a controller with and without a safety valve and safety Relief. The maximum inlet pressure for this type is 1.0 barg. The outlet pressure has a spring range between 20 – 300 mbarg. Connection sizes are 1 “or DN25 and DN50 flanged.

Gas pressure regulator type J48

The Elster gaspressure regulator type J48 is a spring-loaded regulator. The regulator is normally closed. The controller is ideal for controlling various gases for small industrial and domestic applications. The maximum inlet pressure is 350 mbarg. The outlet presurre has a spring range between 5 – 160 mbarg. Connection sizes are 1.1/4″ , 1.1/2″ , 2″screwed or DN25, DN50 flanged. The maximum capacity is 525 Nm3/h.

Gas pressure regulator type J48

The Elster gas pressure regulator type J48 is a spring-loaded regulator. The regulator is normally closed. The controller is ideal for controlling various gases for industrial and domestic applications. The maximum inlet pressure is 350 mbarg. The outlet presurre range until connection size DN80 has a spring range between 5 – 150 mbarg. For the J48 in DN100 and DN150 between 5 – 345 mbarg. Connection sizes are 2.1/2″ , 3″ screwed and DN65, DN80, DN100, DN150PN16 flanged. The maximum capacity is 4898 Nm3/h.